Construction precautions for roof tiles, be sure to pay attention!
Apr 17, 2023
Leave a message
1. When laying roof tiles, a water splashing test should be conducted on the base layer of the roof to check for any leaks before laying the roof tiles.
2. The hanging sequence of roof and eaves tiles should be from bottom to top and from left to right of the eaves. To ensure the quality of hanging tiles, a diagonal line should be drawn from the ridge to the eaves, that is, the remaining line should be aligned with the lower right corner of the first tile under the ridge, and should be in line with the second tile in the second row, the third tile in the third row, until the lower right corner of the eaves tile. Then lay and hang the tiles one by one from bottom to top, achieving a smooth, neat, and aesthetically pleasing tile groove.
3. When laying inclined ridge and inclined trench tiles, the entire roof tile should be hung first. Generally, the inclined trench tiles can be covered with a flashing width of no less than 180mm, and ink lines should be marked. The excess tile surface should be sawn flat with a cutting machine, and then hung in order of numbers.
4. The joint between the ridge tile and the flat tile shall be tightly embedded and flattened with knife ash; The joint of the flat ridge should follow the wind direction; The joint of the oblique ridge should be downward, and the intersection between the flat ridge and the oblique ridge should be tightly sealed with hemp ash.

