What are the basic requirements for laying roof tiles?

Apr 19, 2023

Leave a message

The laying of roof tiles is mainly for waterproofing, wind resistance, and aesthetic decoration. Are the basic requirements for the foundation surface clear during the laying process? Let's take a look at the operation process of laying roof tiles together.
In the process of laying roof tiles, it cannot be ignored to treat the base layer and do a good job in the leveling layer. The debris on the base layer should be cleaned up, and according to the slope requirements, wires should be drawn, sloping, plastered, and reinforced along the drainage direction before plastering.
During the plastering process of the roof tile leveling layer, a large area of plastering should be carried out on the ditch edges, corners, roots, etc. First, a brush should be used to level it, and then a scraper should be used to level it according to the elevation of the reinforcing bars on both sides. Then, a wooden brush should be used to level it and check the flatness of the leveling layer.
After the first plastering of the roof tiles is completed, it is necessary to continue with the second and third plastering and compaction work, especially for the dead pits, dead corners, and sand holes on the foundation layer of the roof tiles, until there are no plastering marks. After the plastering work is completed, attention should be paid to the relevant maintenance work. Watering maintenance should be carried out within 24 hours under normal temperature conditions, and the node waterproof layer construction should be carried out after the maintenance work of the foundation surface is completed.

Send Inquiry